launch x431 V+ 5.0 PRO3
 
NOW WITH TOPOLOGY MAPPING
 
Global Version, No IP Limitation.
 
NEW!!! Support CANFD and DOIP car protocols, Supports Topology Mapping diagnosis: Newly update VCI DBScar VII can work on  any car with CANFD and DOIP protocols. Faster diagnostics.
 
Powerful All Systems Diagnostics + ECU Coding: LAUNCH X431 V+ Version 5.0 scan tool can read/clear codes, view live data, ECU info and perform active test, adaptation, matching, coding for all vehicle systems (Engine, Body, Powertrain, Chassis) to help major maintenance and repair tasks, including ECM, TCM, ABS, SRS, BCM, IMM, BMS, TPMS, SAS, Fuel System, Light System, Wiper System, etc.
It also supports online coding and offline coding functions
 
Launch x431 V+ 5.0 Plus Capabilities in Brief: 
 
Topology Mapping Capability
Active Test/Actuation Tests/ Bi-directional
ECU Coding
Full Systems Diagnoses; Body codes, Powertrain codes, Chassis Codes etc
Over 40 Reset & Service Functions
Adaptation+ Matching+ Reset + Initialization + Coding
Auto VIN Technology 
Ability to read Vehicle ECU Version
150 plus Car Brands and over 10000+ Cars supported
Support Lots of Launch Addons and Accessories sold separately  for additional capabilities; Smartlink HD, Videoscope, Oscilloscope, Key Programmer, Xprog 3, Battery Tester
 
Launch x431 V+ (Plus) 5.0 Capabilities in Detail
 
Over 40 Service resets: LAUNCH X431 V+ 5.0 diagnostic tool supports over 40 reset functions: Engine/ABS/SRS/Transmission reset, ABS Bleeding, Injector coding, Gear Reset, SAS Reset, TPMS Reset, DPF Reset, IMMO Reset, BMS Reset, ETS Reset, Oil Reset, Brake Reset, AFS Reset, EGR Adaptation, GEARBOX, SUNROOF, SUS Reset fully meeting your needs.
Best Hardware:  Android Operating system, 10.1 HD screen, Faster Processor, latest Launch DBSCAR 7
10000+ Car Models + 2 Years Free Update: LAUNCH X431 V+ 5.0 obd2 scanner works on electronic control system of prevailing vehicle models covering Asian, European, American, Russia, Malaysia, India car brands up to 150 car brands, 10000 car models. With Wi-Fi enabled, you can update your car model software with just one click. We provides 
 
ACTIVE TEST & ECU CODING
 
ACTIVE TEST
This diagnostic tool supports active test (Bi-directional control) to request information or command a module to perform specific tests and functions. This LAUNCH X431 V+ 5.0 also have the ability to actuate relays, injectors, coils, or perform system tests, etc.
 
ECU CODING
Because every automobile actuator has a record code in ECU, which is the basis for automobile computer to mobilize their work. LAUNCH X431 V+5.0 is equipped with advanced ECU coding function for addressing the following issues:
 
After you change the bad actuators or certain parts, you need to use this function to make a new code and recognize the new actuators.
By changing the code with the ECU coding, it’s easy to improve vehicle performance or stimulate high-end functions for the car.
ECU coding enables multiple car systems to recognize each other and then the actuators can start to work.
 
OVER 40 SERVICE FUNCTIONS: 
 
OIL RESET – Reset the oil life systems every time the oil and oil filter are changed;
INJECTOR – Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;
BRAKE RESET – Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;
SAS RESET – Perform steering angle sensor calibration and clear records;
BAT.RESET – Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.;
BLEEDING– When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity;
ELEC.THROTTLE RLRN – Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state;
TPMS RESET – Tire pressure resetting is required to be performed after maintenance is performed;
DPF REG – Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance;
GEAR LEARN – Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced;
KEY CODING – Help ECU to recognize the new keys when you need to add new keys.
 
Data Record & Report & Print & Wireless Connection Launch X431 V+ scanner can generate Vehicle Health Report , what's more ,you can even share and print out the report to your customers via inbuilt email